Download PDF

Technical Specifications

 

15 1/2 RS45

 Diameter: 393.7mm (15 1/2")  
IADC Code: 625X  
Design number: UT77  
State standard designation: ТЗ-ЦГВУ  
 

Specification
Gradient angle of axle journal 36°
Axle journal offset relative to drill bit axis 1.50 mm
Bearing type Roller bearing
Sealing Elastomer
Total number of inserts (inner/heel row) 186 (123/63)
Total number of insert rows (inner/heel row) 14 (11/3)
Number of changeable nozzles 4
Connecting thread З-177 (7 5/8 REG)
Drill bit net weight, kg 163.00
Drill bit gross weight, kg 167.40
 

Recommended Drilling Conditions
Rotation speed 300-40 rpm
Thrust load 21.00-33.00 t (46200 - 72600 lbs)
The lower level of rotation speed value corresponds the upper level of thrust load value and vice versa.
 

Purpose
The drill bit is designed for drilling hard abrasive formations
 

Design Features
Combined circulation (central and side), for which it is necessary to unscrew the screw from the central unit.

The leg shirttail and entering edge are hardfaced with tungsten carbide

The leg is protected with tungsten carbide inserts

Tungsten carbide inserts on cone gage.
 

Views: 8901