Download PDF

Technical Specifications

 

11 5/8 FS35

Diameter: 295.3mm (11 5/8")  
IADC Code: 547X  
Design number: UT391  
State standard designation: СЗ-ЦГАУ  
 

Specification

Gradient angle of axle journal 33°
Axle journal offset relative to drill bit axis 5.60 mm
Bearing type Journal bearing
Sealing Elastomer
Total number of inserts (inner/heel row) 176 (122/54)
Total number of insert rows (inner/heel row) 14 (11/3)
Number of changeable nozzles 4
Connecting thread З-152 (6 5/8 REG)
Drill bit net weight, kg 90.30
Drill bit gross weight, kg 93.10
 

Recommended Drilling Conditions

Rotation speed 180-40 rpm
Thrust load 13.00-25.00 t (28600 - 55000 lbs)
The lower level of rotation speed value corresponds the upper level of thrust load value and vice versa.
 

Purpose

The drill bit is designed for drilling medium hard abrasive formations
 

Design Features

Combined circulation (central and side) for what the screw from the central unit must be unscrewed.

The shirttail and leg entering edge are hardfaced with tungsten carbide

The leg is protected with tungsten carbide inserts

Tungsten carbide inserts on cone gages

 

Views: 290