Download PDF

Technical Specifications

 

10 5/8 M65

Diameter: 269.9mm (10 5/8")  
IADC Code: 632Y  
Design number: T238  
State standard designation: ТКЗ-ПГВ  
 

Specification

Gradient angle of axle journal 36°
Axle journal offset relative to drill bit axis 0.50 mm
Bearing type Roller bearing
Sealing None
Total number of inserts (inner/heel row) 150 (95/55)
Total number of insert rows (inner/heel row) 12 (9/3)
Number of changeable nozzles 3
Connecting thread З-152 (6 5/8 REG)
Drill bit net weight, kg 70.00
Drill bit gross weight, kg 72.80
 

Recommended Drilling Conditions

Rotation speed 115-60 rpm
Thrust load 8.00-22.00 t (17600 - 48400 lbs)
The lower level of rotation speed value corresponds the upper level of thrust load value and vice versa.
 

Purpose

The drill bit is designed for drilling hard abrasive formations with hard streaks
 

Design Features

The leg shirttail and entering edge are hardfaced with tungsten carbide.

Tungsten carbide inserts on cone gage.

Side and bearing circulation of the borehole bottom with air and water mixture



 

Views: 334